Drilling Depth 1600mm Cnc Deep Hole Drilling Machine Making An Deep Hole Max Diameter φ 40
Product Feature
1. Combining the advantages of each model as a whole ,
2. the work table can satisfy the market most of the mould processing ,
3. body rigidty structure is reasonable ,
4. stable processing broadsword,
5. humanized design of a support frame ,convenient assembly and disassembly ,
assembly and disassembly tool and reduce time
Processing Range
1. It is application for deep hole working of various types of workpieces:
a. Moulds (including water pores, hot runners,centre holes, guide post holes, and ejector sleev holes )
b. hydraulic value ,distributor and heat exchanger plate ,
c. waterway hole,
2. Convenience for processing various deep holes,
3. Better solution for such various specific deep holes as cross holes , inclined holes, blind holes,and flate blind holes, advance and efficiency and consistency
Specification
Model | TL1600 |
Number of drilling spindle | Uniaxial |
Inner diameter of drilling | 2.5-40mm |
Max depth of drilling | 1600mm |
Size of working table | 1800*1100mm |
X axis travel | 1600mm |
Y axis travel | 1100mm |
Z axis travel | 1650mm |
Drilling cutting feed rate | 10-250mm |
Max rotary speed of spindle | 7000rpm |
Spindle motor | (servo)11-15kw |
Moving motor from right to left on work table | servo 3.0kw |
Moving motor from up to down on spindle | servo 3.0 kw |
Moving the motor from front to back on spindle | servo 2kw |
Pressure of cutting pressure pump | 80 kgf/cm² |
Oil mass of oil pressure pump | 6-60 L/min |
Capacity of cutting oil tank | 700 L |
load capacity of working table | 10000kgs |
machine net weight | 13000kgs |
Machine power | 30kw |
Standard accessories
Taiwan spindle
Fanuc or Mistubishi controller
Spindle oil cooler + NSK Bearing
gundrill + precision guide sleeve and rubber guide
grinder machine
HIWIN linear way